Automobile Roads and Road Construction

ORDER OF REGISTRATION AND SUBMISSION OF PUBLICATIONS

Procedure of the manuscript submission for publication

The manuscript for publication is submitted to the editorial board of the Scientific and Technical Journal "Automobile Roads and Road Construction" or to the e-mail address of the Journal: e-mail: avtodorogi-ntu@ukr.net.

The materials and accompanying documents are addressed to the editor-in-chief in the specialty in which the article is submitted. The editor-in-chief preliminarily approves the correspondence of the manuscript to the specified specialty, and the presence and content of the following structural elements, namely:

information on the author(s) - last name and initials, academic degree, ORCID (in the case of a collective article - the authors are listed in the alphabetical order);
principal place of the author(s)’s work;
author’s (authors) photo;
the manuscript’s title;
abstract (in the language of the manuscript) of at least 1800 characters;
keywords (in the language of the manuscript);
introduction which outlines the issues, the relevance of the chosen topic, the analysis of recent research and publications, the purpose and objectives of the paper;
a presentation of the core material of the research and the obtained results;
conclusions summarizing the work and prospects of further research in this direction;
references;
the title of the manuscript in English if the language of the manuscript is Ukrainian or in Ukrainian if the manuscript is in English;
information on the author (authors) in English if the language of the manuscript is Ukrainian or information on the author (authors) in Ukrainian if the language of the manuscript is English: name and surname , academic degree, ORCIDID;
the abstract in English if the language of the manuscript in Ukrainian or the abstract in Ukrainian if the language of the manuscript is English of at least 1800 characters;
keywords in English if the language of the manuscript in Ukrainian or keywords in Ukrainian if the language of the manuscript in English.

If agreed, the executive editor sends the materials to the chief editorof the Scientific and Technical Journal "Automobile Roads and Road Construction" with a proposal to accept the manuscript for consideration by the editorial board or conduct additional review.

When submitted directly to the editors of the collection, it should be in a hard copy in duplicate and its electronic version is sent to the e-mail of the collection e-mail: avtodorogi-ntu@ukr.net. The electronic version of the article should fully correspond to the hard copy. The manuscript must be signed on each page by all the co-authors or their responsible representative.

When submitting the manuscript of the publication to the collection's e-mail address, an email is sent from the e-mail address which is indicated on the author’s ORCID page.

In case of any method of transfer, the materials and accompanying documents are addressed to the editor-in-chief in the specialty in which the article is submitted.

The following is added to the manuscript:

Cover letter from the author (in case of the collective work of the authors - from the responsible representative) in accordance with the established form (see Annex A). The cover letter can be submitted both, in a hard copy or electronically to the e-mail of the scientific collection. The name of the specialty upon which the article is submitted (051 “Economics”; 071 «Аccounting and taxation»; 073 “Management”; 075 "Marketing"; 076 " Entrepreneurship, trade and exchange activities "; 101 "Ecology"; 102 «Chemistry»; 124 "System analysis", 133 «Branch mechanical engineering» (мachines for the construction of transport infrastructure, production of building materials and products); 183 “Environmental protection technology”; 192 “Building and civil engineering”; 193 “Geodesy and land management”; 194 “Hydraulic engineering, water engineering and water technology”; 275 “Transport technology (by type)”) should be indicated in the cover letter.
Information on the authors is to be provided in the established format (see Annex B). Information on the authors must be submitted in two languages - in Ukrainian and in English.
A review of the manuscript by a scientist who has an academic degree and conducts the research under the specialties of the collection and has published at least one manuscript in the editions included to the List of scientific professional editions of Ukraine or foreign editions included in Web of Science Core Collection and / or Scopus for the last three years or has a monograph or sections of monographs published by international publishing houses related to categories A, B or C according to the classification of the Research School for Socio-Economic and Natural Sciences of the Environment (SENSE). A review of the manuscript may be sent to the e-mail address of the collection by the reviewer from his e-mail, which is indicated on his personal page ORCID.

If the manuscript does not meet the requirements for registration and submission for publication in the Scientific and Technical Journal "Automobile Roads and Road Construction, which are specified in this Procedure, it is not accepted for consideration.

Procedure of the manuscript processing

The scope of the manuscript: 7-15 pages, A4 format (not less than 12 thousand printed characters and not more than 30 thousand printed characters with spaces without considering the references and abstracts). The languages of the manuscript are Ukrainian, English. The manuscript should include the following structural elements:

UDC;
information on the author(s) - last name and initials, academic degree, ORCID (in the case of a collective article - the authors are listed in the alphabetical order);
principal place of the author(s)’s work;
author’s (authors) photo;
the manuscript’s title;
abstract (in the language of the manuscript) of at least 1800 characters;
keywords (in the language of the manuscript);
introduction which outlines the issues, the relevance of the chosen topic, the analysis of recent research and publications, the purpose and objectives of the paper;
a presentation of the core material of the research and the obtained results;
conclusions summarizing the work and prospects of further research in this direction;
references;
the title of the manuscript in English if the language of the manuscript is Ukrainian or in Ukrainian if the manuscript is in English;
information on the author (authors) in English if the language of the manuscript is Ukrainian or information on the author (authors) in Ukrainian if the language of the manuscript is English: name and surname , academic degree, ORCIDID;
the abstract in English if the language of the manuscript in Ukrainian or the abstract in Ukrainian if the language of the manuscript is English of at least 1800 characters;
keywords in English if the language of the manuscript in Ukrainian or keywords in Ukrainian if the language of the manuscript in English.

The abstract should reflect the consistent logic of the results; describe the main purpose of the study and summarize the most significant results. In the abstract, it is required to specify the following structural parts: in Ukrainian - introduction, issues, purpose, materials and methods, results, conclusions; In English - Introduction, Problem Statement, Purpose, Materials and Methods, Results, Conclusions.

General requirements for manuscript preparation

The text of the article must be in the Microsoft Word editor * .rtf (prefer), *.doc format, Times New Roman type, type size 11, 1 interval, 0 pt after the paragraph. The paragraph indention is 1,0 cm. The margins (with the header) are set like mirror margins with the following dimensions: upper - 20 mm; bottom - 40 mm; inside - 30 mm; outside - 20 mm.

UDC are capitalized (upper case) and highlighted in bold (alignment – left, without indention). Surname and initials (in Ukrainian), surname and the first name (in English) are printed in capital letters and bold, ORCIDID, and an academic degree are printed in capital letters in italics (alignment - to the left, without indention). The principal place of work is printed on a new line in capital letters in italics (alignment - in width, without indention). If the authors have different principal places of work, then their names and initials are specified by the index which is specified before the work place. The title of the article is printed in capital letters and highlighted in bold (centered alignment). The titles of subsections are typed in capital letters and in bold; before and after the header, the interval of 6 pt is set (centered alignment). Subheadings are printed in capital letters in italics and highlighted in bold (alignment - to the left, starting with the paragraph).

Figures containing the illustrations (photo, drawing, figure) should be with the space of one line from the main text.

For charts and graphs, you need to add a source file with data and values (built-in Exel table). Using charts and graphs, you use JPG, TIFF, PNG formats with a resolution of at least 500Х500 points.

The figures are numbered in the order of their location in the text; parts of the figures are numbered in letters - a, b, ... The Figures containing the graphs should be presented as Microsoft Office charts. All captions in the drawings must be in Times New Roman, 9-11 type size. The word "Figure" and the Figure’s number should be typed below the illustration, bold and left justified. The name of the Figure is given using the hyphen and in upper case letters. It is prohibited to duplicate information in tabular form and in figures.

Tables should be prepared using the MS Word table editor and presented in the text after the first reference to the table in the text with its number and title. Tables should be given over the width of the sheet, book layout, 9-11 type size. The word "Table" and the table’s number should be placed above the tables, right justified and bold. The Table’s name should be placed in the middle above the table. If the table is wide, it should be presented in the book layout with the orientation of the text to 90º. In the case of the table transfer to another page, it is indicated "Continuation of Table N", with the duplicate of the table’s heading. It is prohibited to duplicate information in tabular form and in figures.

Formulas should be presented using the MathType formula editor. It is necessary to provide definitions of values or abbreviations that are used for the first time in the text with the subsequent use of the appropriate term. The formulas are numbered on the right side along the edge of the page. The legend of the equations after the word "where" are given identically to the symbols in the formula using the MathType formula editor. In the publications (abstracts) in English, a dot should be in numbers to indicate the digit capacity (for example, 172.15). In the manuscripts (abstracts), in Ukrainian, in the numbers for indicating the digit capacity comma should be used (for example, 172,05).

References should be presented at the end of the article. References are numbered sequentially in the order of their citation in the text of the article. The references to unpublished and unfinished papers are inadmissible. References on books (monographs, separate chapters, etc.), articles from scientific periodical editions, conference procedures, patents and author's certificates, abstracts of theses, electronic resources are possible. References should consist of two parts: «Список літератури» та «REFERENCES».

“Список літератури” is the sources in the original language prepared in accordance with the Ukrainian standard of bibliographic description (DSTU 8302: 2015: Bibliographic Reference - General Terms and Rules of Composition, Kyiv, 2016). The titles of articles, monographs, collections, works, abstracts, abstracts of theses and preprints should be indicated fully. For the articles it is mandatory to indicate the last names of all co-authors (if the authors are from one to seven; if from eight or more authors –the first six authors should be listed and followed by three dots (...) and the last author indicated); after that the title of the edition in the language of the original, the place of publication (indicating a full name of the city), the year of issue, the volume’s number, the numbers of initial and final pages. For monographs it is necessary to indicate the names of all co-authors (if authors from one to seven; if from eight or more authors - list the first six authors, put three dots (...) and indicate the last author), then the name of the monograph, the place of publication (indicate a full name of the city), the year of publication, total number of pages. The author's name and surname as well as the title of the publication (monograph) must be indicated in the original language.

“References” is the list of literature translated into English and transliterated in the Latin alphabet and is prepared in accordance with the international style of scientific publications processing. That is, in the case where the reference is made to the source which name is in English (including in the case of an abstract in English), then in the section "References" it is given in English. The names of periodical issues (magazines) are given in accordance with the official Latin way of writing by the registration number https://doi.org/10.15407/scin13.05.019 to the source.

Examples of how references should be listed

Список літератури

Законодавчі акти:

1. Про автомобільні дороги: Закон України від 08.09.2005 N 2862-IV, редакція від 25.03.2018 N 2304-VIII // База даних Законодавство України / Верховна рада України. URL: http://zakon.rada.gov.ua/laws/show/2862-15 (дата звернення: 15.10.2018).

2. Directive 2008/96/EC of the European Parliament and of the Council of 19 November 2008 on road infrastructure safety management (Директива 2008/96/ЄС від 19 листопада 2008 року «Про управління безпекою дорожньої інфраструктури») // База даних законодавство Європейського союзу. URL: https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX%3A32008L0096 (дата звернення: 15.10.2018).

Нормативні документи:

1. ДБН В.2.3-6:2009. Споруди транспорту. Мости та труби. Обстеження і випробування. Київ, 2009. 48 c. (Інформація та документація)

Статті в журналах:

1. Бондар Т.В., Нагребельна Л.П., Кононенко А.О., Беленчук О.В., Ольхова М.Ю., Петрашенко О.П. Рейтинг мережі доріг державного значення за даними аварійності 2017 року. Дороги і мости. Київ, 2017. Вип. 17. С. 89-96.

2. Єфименко Р.В, Попович Н.І., Беленчук О.В. Аналіз причин виникнення ДТП і розроблення заходів із підвищення безпеки дорожнього руху. Автошляховик України. Київ, 2015. № 6 (238). С. 34-35.

Книги:

1. Мозговий В.В., Дорошенко Ю.М., Онищенко А.М., Кузьмінець М.П., Смолянець В.В., Заіченко В.В. Будівельне матеріалознавство в дорожньому будівництві : навч. посіб. Київ, 2014. 415 с.

Матеріали конференцій:

1. Богдан Т.Р. Физика импульсных разрядов в конденсированных средах. Материалы ХVI Международной научной конференции (19-22 авг. 2013, г. Николаев). Николаев, 2013. C. 25-35.

2. Далудіна А.М., Кутас Е.О., Внукова Н.В. Аналіз та оцінка шумового навантаження при функціонуванні автотранспортних систем. Захист навколишнього середовища. Збалансоване природокористування : збірник матеріалів 2-го Міжнародного студентського конгресу (23–24 квітня 2015 р., м. Львів,). Львів, 2015. С. 31-32.

Патенти:

1. Патент України № 25742. Соколова Д.О., Берестяна А.М. Люмінесцентний матеріал.

Авторські свідоцтва:

1. А. с. 1810306 СССР, МКИ5 С 02 F 1/469. Способ деминерализации водных расворов / В.Д. Гребенюк, Н.П. Стрижак, В.В. Гончарук, А.О. Самсони-Тодоров, А.В. Гречко. № 4934753; заявл. 08.05.91; опубл. 23.04.93, Бюл. № 15.

Дисертації та автореферати дисертацій:

1. Старовойт С.В. Видавнича діяльність Національної академії наук України у 1918–1933 рр. : автореф. дис. ... канд. іст. наук. Київ, 2003. 20 с.

2. Imber, A. (2003). Applicant reactions to graduate recruitment. (Unpublished Doctoral dissertation). Monash University, Victoria, Australia.

Електронні ресурси віддаленого доступу:

1. Наукові публікації і видавнича діяльність НАН України. Київ, 2007. URL: http://www.nas.gov.ua/publications (дата звернення: 19.03.2014).

References

Legislative acts:

1. Pro avtomobilni dorohy: Law of Ukraine of 08.09.2005 N 2862-IV, editorial office of 25.03.2018 N 2304-VIII // Database of Legislation of Ukraine / Verkhovna Rada of Ukraine. URL: http://zakon.rada.gov.ua/laws/show/2862-15 (Last accessed: 15.10.2018) [in Ukrainian].

2. Directive 2008/96/EC of the European Parliament and of the Council of 19 November 2008 on road infrastructure safety management // European union law. URL: https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX%3A32008L0096 (Last accessed: 15.10.2018).

Regulations documents:

1. DBN V.2.3-6:2009. Sporudy transportu. Mosty ta truby. Obstezhennia i vyprobuvannia (State Building Norms (DBN V.2.3-6:2009) Transport facilities. Bridges and pipes. Inspection and testing). Kyiv, 2010. 48 s. (Information and documentation) [in Ukrainian].

Articles in magazines:

1. Tetyana Bondar, Liudmyla Nagrebelna, Alla Kononenko, Olga Belenchuk, Mariya Olhova, Olexiy Petrashenko. Reitynh merezhi dorih derzhavnoho znachennia za danymy avariinosti 2017 roku (The rating of national roads network according to accidents in 2017). Dorogi і mosti. Kyiv, 2017. Vol. 17. S. 89-96 [in Ukrainian].

2. Yefymenko R.V, Popovych N.I., Belenchuk O.V. Analiz prychyn vynyknennia DTP i rozroblennia zakhodiv iz pidvyshchennia bezpeky dorozhnoho rukhu (Analysis of the causes of accidents and development of measures to improve road safety). Avtoshliahovyk Ukraiiny. Kyiv, 2015. N 6 (238). S. 34-35. [in Ukrainian].

Books:

1. Mozghovyi V.V., Doroshenko Yu.M., Onyshchenko A.M., Kuzminets M.P., Smolianets V.V., Zaichenko V.V. Budivelne materialoznavstvo v dorozhnomu budivnytstvi (Construction materials science in road construction) : Tutorial. Kiev, 2014. 415 s. [in Ukrainian].

Conferences materials:

1. Bogdan T.R. Fizika impul`sny`kh razryadov v kondensirovanny`kh sredakh. Materialy` ХVI Mezhdunarodnoj nauchnoj konferenczii (Physics of pulsed discharges in condensed matter. Materials of the 16th International Scientific Conference). (19-22 avg. 2013, g. Nikolaev). Nikolaev, 2013. S. 25-35 [in Russian].

2. Daludina A.M., Kutas E.O., Vnukova N.V. Analiz ta otsinka shumovoho navantazhennia pry funktsionuvanni avtotransportnykh system. Zakhyst navkolyshnoho seredovyshcha. Zbalansovane pryrodokorystuvannia : zbirnyk materialiv 2-ho Mizhnarodnoho studentskoho konhresu (Analysis and assessment of noise load during the operation of motor transport systems. Environmental Protection. Balanced nature management : a collection of materials of the 2nd International Student Congress) (23–24 kvitnia 2015 r., m. Lviv,). Lviv, 2015. S. 31-32 [in Ukrainian].

Patents:

1. Patent Ukrainy № 25742. Sokolova D.O., Berestiana A.M. Liuminestsentnyi material. (Patent of Ukraine № 25742 Luminescent material) [in Ukrainian].

Copyright certificates:

1. A. s. 1810306 SSSR, MKI5 S 02 F 1/469. Sposob demineralizacii vodnyh rastvorov (The method of demineralization of aqueous solutions). V.D. Grebenjuk, N P. Strizhak, V.V. Goncharuk, A.O. Samsoni-Todorov, A.V. Grechko. No. 4934753; zajavl. 08.05.91; opubl. 23.04.93, Bjul. No. 15. [in Russian].

Dissertations and abstracts of dissertations:

1. Starovoit S.V. Vydavnycha diialnist Natsionalnoi akademii nauk Ukrainy u 1918–1933 rr. (Publishing activity of the National Academy of Sciences of Ukraine in 1918–1933) : avtoref. dys. ... kand. ist. nauk. Kyiv, 2003. 20 s. [in Ukrainian].